OK, I will try to post some picture updates on the weekend.
But Until then, here is what I'm waiting for:
Shipment 1: AEV Stuff
Source: Ranger Abu Dhabi
Expected Delivery Date: 15/2/2011
Expected installation Date: 1/3/2011
Contains:
1) AEV Highline KIt
this kit will give 3.5" more space to put bigger tires. I can fit 33" tires on the TJ with 0 lift, 35" tires with only 2" lift.
2) AEV Tummy Tucker for YJ, TJ & LJ
This Skidplate will give RB 2.75" more clearance at the skid plate with no additional lift.
As you can see, I'm aiming for a "High Clearance" and "Low Center of Gravity" concept. I will be (inshallah) running 35" tires with only 1.75" of lift!
Shipment 2: Differential Stuff
Source: Summitracing.com
Expected Delivery Date: 21/2/2011
Expected installation Date: 1/3/2011
Contains:
1) Superior Rubicon 4.88 Ring and Pinion Kit
I was originally planned for Richmond but they don't make thick gears.
2) G2 Rubicon and Standard Ring and Pinion Master Installation Kit
It is hard to find ones that fits Rubicon axle...
3) Superior Evolution Rear Dana 44 30 spline axle shafts
This is the strongest I can find. I opted for the 30 spline because I can always use the old ones as a spare.
4) Superior Super 35 Dana 44 Truss Kit:
This will make my Rear axle Bomb Proof. It is a bolt on kit so I don't need to worry about wielding things up!
5) SmittyBilt x2o-10 Comp Series Winch with Free Smittybilt winch Cover:
Water Proof, Light, and cheap !
It will be useful when I become a Marshal !
Shipment 3: RCV Front axle Shafts
Source: ebay
Expected Delivery Date: Delivered
Expected installation Date: 1/3/2011
Contains:
1) RCV Performance Front Dana 44 CV Shaft
The Strongest axle shaft. Being, a Dana 44 shaft, it is much stronger than the dana 30 counter part. So I'm expecting my Ring and Pinion to break before this one does !
Shipment 4: Diff Stuff Continues ...
Source: Quadratec.com
Expected Delivery Date: unknown ..
Expected installation Date: 1/3/2011 .. hopefully ..
Contains:
1) Synergy Inner Axle Sleeve Kit for For Front Rubicon Dana 44
It's a Jeep thing ..
2) Riddler Differential cover for Dana 44
Complete the Front axle.
3) LubeLocker Differntial Gasket
Just an Expensive Differential Gasket ..
Shipment 5: 35" tires
Source: 4wd.com
Expected Delivery Date: 15/3/2011
Expected installation Date: 30/3/2011
Contains:
1) BFGoodrich KM2 Mud Tires 35x12.5R15
Only 1LB heavier than my current 33x12.5R15 Cooper tires.
Shipment 6: Front brake upgrade kit
Source: Black Magic (Thanks SSS !
)
Expected Delivery Date: 15/2/2011
Expected installation Date: 1/3/2011
Contains:
1) Jeep TJ 97-98, Front Black Magic Brake Pads, Calipers and Rotors
No Pictures, Sorry !
Shipment 7: remaining Stuff
Source: Different local Sources
Expected Delivery Date: Mostly Delivered
Expected installation Date: Mostly Installed
Contains:
1) Bestop Tire carrier:
I like how I can open and close the tire carrier and the rear door through a single motion.
2) American Off Road 3Watt LED light (SPOT)
3) American Off Road 3Watt LED light (Flood)
Round things look good on TJ !
4) American Off Road 10Watt LED light (Flood)
Backup light !
5) Mopar Rock Crawler Winch Bumper
To complete the "looks Stock" theme !
6) Right and Left Off Road Trail Tools Tray and Mounting Bracket
Got this from Blingmytruck.com to hold my Jerry Cans. Really Cool stuff !
Shipment 8: Stroker Stuff
Source: Summitracing.com (no yet ordered)
Expected Delivery Date: 15/2/2011
Expected installation Date: 30/3/2011
Contains:
1- Jeep 258 Crank Shaft (QTY 1) : viewtopic.php?f=3&t=11595&p=194544#p194544
2- Crankshaft Damper Spacer #HESBS (QTY 1):
http://www.hesco.us/shop.asp?action=det ... catId=7757
3- Jeep 4.0L 6.125" rods (QTY 6) : Use the current ones
4- Sealed Power CP-Series Rod Bearings set of 6 (QTY 1) : Buy from WM
4- ICON Performance Pistons IC944KTM-030 kit (QTY 1):
http://www.summitracing.com/parts/UEM-IC944KTM-030/
5- CompCams #68-231-4 206/214 degree camshaft (QTY 1):
http://www.summitracing.com/parts/CCA-68-231-4/
6- Mopar valve springs (QTY 6):
http://www.summitracing.com/parts/DCC-5249464/
7- Mopar valve retainers (QTY 6):
http://www.summitracing.com/parts/DCC-4452032/
8- Mopar Valve Keepers (QTY 6):
http://www.summitracing.com/parts/DCC-4529218/
9- 24 LB Bosch Ford Refurbished Injectors set of 8 :
http://www.ebay.com/itm/320765208016?_t ... 54&vxp=mtr
10- Flowkooler water pump (QTY 1):
http://www.summitracing.com/parts/BRA-1747/
11- JET 180 degree thermostat (QTY 1):
http://www.summitracing.com/parts/JET-10170/
12- High Flow Thermostat Housing #HFTH
http://www.hesco.us/shop.asp?action=det ... 3007&catId
13- Ported HO 1.91"/1.50" cylinder head (QTY 1) : Modify my current head
14 - Victor 0.043" head gasket #54249 (QTY 1):
http://www.hesco.us/shop.asp?action=det ... 384&catId=
10- Roller Rockers (QTY 1):
http://www.summitracing.com/parts/CSP-S40196/
11- ARP High Performance Series Connecting Rod Bolt Kits (QTY 1):
http://www.summitracing.com/parts/ARP-112-6001/
12- Painless Wiring 62mm Throttle Body (QTY 1):
http://www.summitracing.com/parts/PRF-65300/
14- Griffin 3" thick vs stock Radiator vs Custom made local radiator (QTY 1): we will see ...
15- SamcoSport Silicone Coolant hose kit (QTY 1):
http://www.quadratec.com/products/51207_641X_PG.htm
16- Colyes Gear Timing Set (QTY1):
http://www.summitracing.com/parts/CLO-9-3127/
17- Tuff Stuff Performance 7510D 175 AMP Alternator (QTY 1):
http://www.summitracing.com/parts/TFF-7510D/
18- Clevite Camshaft Bearing Sets SH1980S (QTY 1):
http://www.summitracing.com/parts/CLE-SH1980S/
Shipment 9: Things to be ordered
Source: Depends on the parts
Expected Delivery Date: 15/2/2011
Expected installation Date: 30/3/2011
Contains:
1) The remaining stuff for my stroker from Hesco and ebay
2) Genright 25 Gal Tank
Gives me 10 extra gallons of Fuel .. My Current tank is only 15 Gallons..
3) license Plate relocation for the rear.
4) Recaro Style Seats ..
Thinking about it.
5) King shocks ..
Dreaming about it !