Landcruiser 200 Series - Wheel Offset

Escape · Post by **Escape** » Sat Apr 15, 2017 10:25 pm

Hi All,

My wife has a Landcruiser 5.7l VXR 2013 model and I am thinking about turning it in to a desert camper for the family.

I want to know what offset I can run without getting any rubbing. The tyres will be Yokohama Geolander ATS LT285/70R17 121/118 R.

I think the factory offset is +60, but I was thinking about going down to +30 or even 0. Has anyone got any experience with this?

The LC does not have a lift on it yet, but but I am going to put OME BP-51s, so expect to get about 2 inches extra height.

Thanks in advance!

Cheers, Al

P.S. Iqsaan helped me change the bumper on it on my first Newbie trip about 3 years ago, but that will need to be done again. Hopefully not the same way!

Zeebzog · Post by **Zeebzog** » Sun Apr 16, 2017 7:13 am

Did mine at Artic Truck.

BPI 51s
40mm lift
285/70/17 tires
Stock rims, but went down from an 18 to 17 rim
And spacers to push the wheels out a bit. However needed a slight alteration to front wheel arch due to rubbing on reverse full lock.

Need to remember which spacers I bought...I think they were spidertrax but cannot remember how thick.

Sent from my iPhone using Tapatalk

Zeebzog · Post by **Zeebzog** » Sun Apr 16, 2017 7:55 am

Yep spidertrax 1.25inch product code WHS023

Sent from my iPhone using Tapatalk

Escape · Post by **Escape** » Tue Apr 18, 2017 6:23 pm

Hi Lee, do you know what off set the 17inch rims are?

Sent from my iPad using Tapatalk

Zeebzog · Post by **Zeebzog** » Tue Apr 18, 2017 7:49 pm

Mine are stock 17inch Toyota rims, so stock offset.

Sent from my iPhone using Tapatalk