Cooper AT3 VS yokohama geolander ATS

Anything related to off-road Technical questions and Modifications
User avatar
moonshine
Newbie
Newbie
Posts: 13
Joined: Wed Apr 30, 2014 11:51 am
Location: Abu Dhabi

Re: Cooper AT3 VS yokohama geolander ATS

Post by moonshine »

8 PSI... ! i will keep that in mind.. i used to go 12-14 on the old stock ones. Thanks for the info.
moonshine - 0552434504
Current: 2014 XTerra (Stock)
Previous: 2005 Pathfinder (R50)+ K&N Air Intake

Never Stop Wondering. Never Stop Wandering.

User avatar
Escape
Advanced
Advanced
Posts: 251
Joined: Fri Dec 05, 2014 9:37 am
Location: Dubai
Location: Dubai

Cooper AT3 VS yokohama geolander ATS

Post by Escape »

I had the KO's on my FJ for a long time. Probably not what you want to hear, but I never really liked them. They did not have the same traction / float as other tyres and anything above 10 psi and they were useless. They are were very difficult to balance and quite noisy. The upside is that I never had a pop out and I did pull a stick out of the sidewall that had gone in about 2cm (with the wall of the tyre, not perpendicular) and there was no puncture. They were also very good when driving through rocky wadis in Oman. Tony bought KO2's and said he had to drop the pressure to 5psi to get grip. I think he ended up selling them.


Sent from my iPad using Tapatalk

Post Reply