Abu Dhabi Off-Road Club Forums

Hi All,

This is mouhanad from Tadmur Auto Works.

I would like to announce that we now have King shocks for Wranglers TJ and JK that mount on original brackets with absolutely no modifications.
We also have King shocks for all Nissan Patrols, again these mount on factory brackets with no modifications.

:cheers: :cheers:

happy offroading

Hi Mouhanad,

Glad to see you here on our site.

It would be great if you also mention the lift range those shocks are meant for and if possible a rough cost estimate so members will have an idea.....a picture of the offered shocks will answer a million questions hehehehe......

For those who do not know, LIWA-RUBICON was totally built by Mouhanad in Tadmur Garage and my advise to all those who want professional work to be done on their 4x4's to pay him a visit ..... You wont regret it.

Regards,

Not a bad idea to also put a map or at least directions on how to find the shop as some of us are like lost sheeps and really looking for a good workshop for our babies.

thanks abdulrahman,

Viking, our GPS coordinates are N25 17.069 E55 27.060 - our summer hours are 7-12 & 4-8 ph: 06 535 1095

Nissan shocks are factory fit for 0 - 2 lift, they are priced at 10,500 but are 20% off for the month of August




TJ shocks will fit 3-4 inch lift - the one in the picture is the rubicon. they run 7400.





JK shocks will fit 3" lift and higher, and they run 8600

all these are 2.5" king racing shocks with remote reservoirs.

here is a sneak peak on our latest project.

6.0L TJ





I'll post some more on another thread next week.

Hi Muhannad, how are you doing? Ok what about Nissan Pathfinder? I need them for my rally raid Nissan pathfinder.

well, don't have any ready for the pathfinder. but King shocks are working very hard with us on all our custom requests so if you want to stop by and i can take measurements and see if it is doable.

Hi Muhannad,

It is nice to see u on our site

Guys and Gals, as the Chief said, Tadmour are real pros when it comes to Jeeps. I have personally seen the 6.0 l TJ Project and I must say that it will be a monster 8O

Muhannad, keep us posted with latest events , and send my regards to Sami

thanks nasser, i think i'm gonna like it here.

we are expecting to start the TJ 6.0 next thursday - so i'll post the updates.

i spoke to sami, its done.

Its nice to have u here But can u confirm the joint venture with Frank & Sami, then the 6.0L is it legal cuz our friend Sahrawi had to cancel his wrangler after the modification, your Aug 20% discount i like to have it as permenant for AD4x4 members

hello Muhannad

I am glad to see you here my friend , gentlmen they are doing some amazing stuff over there , I've seen it myself , I've been dealing with Tadmur since almsot 2 years and they've never let me down .

once again it's great to have you here Muhannad :cheers:

IT SEEMS TO BE INTERESTING...................

thanks all for the warm welcomes.

Bulldozer wrote: Its nice to have u here But can u confirm the joint venture with Frank & Sami,

Tadmur, Desert fun and 4wdme.com were planning to merge under AEV - due to last minute details, the merger happened without Tadmur. We are still working very closely together.

Bulldozer wrote: then the 6.0L is it legal cuz our friend Sahrawi had to cancel his wrangler after the modification,

the 6.0L is illegal, the problem is most installers weld on the chassis to do this conversion. our conversion is fully reversible, we utilize the original engine mounts and we use a second stand alone wiring harness. we pack and deliver all the old parts to the customer. at any point in time, we can have the car back to stock in a day or two.

Bulldozer wrote: your Aug 20% discount i like to have it as permanent for AD4x4 members

I don't have a large margin to be able to promise that, the discounted price is because I'm able to get them at the discount so i pass it on to the customers, i will try to keep some special deals coming towards AD4x4 guys throughout the year.

Muhannad,
Welcome to Ad4x4.com. good to see you around. and good luck with the 6.0L, its gonna be fun to drive that rig out

Sorry about the AEV thing and that it didnt work for your.

thanks abdullah.