Need cylinder head jeep inline 6 / 4.0L

[Cybershot]

Hey guys

Need urgently an cylinder head for the well known inline 6 with 4.0L. Dosn't matter Cherokee or wrangler. Would prefer an 2002 till 2006 head, but take any offered. Went thru the junk yards in AD and there in non for me.

Maybe somebody from sharja or dubai kenn keep his eyes open during the next round in there junk yards.

Any other advice is wellcome!!!

[Gladiator]

check with Qasrawi... Mussafah... he should have it

[SCORPIO]

there is a full engine for sale @ Dubizzle

check it if the price is good and you have a storage place
take it, and i wish you might not have any future problems
in other parts but in case it happened it will be easier for you

good luck

[Cybershot]

check with Qasrawi... Mussafah... he should have it

Any Location or phone Nr?

there is a full engine for sale @ Dubizzle

check it if the price is good and you have a storage place
take it, and i wish you might not have any future problems
in other parts but in case it happened it will be easier for you

good luck

Could not find it in Dubizzle... any link?

[Gladiator]

check with Qasrawi... Mussafah... he should have it

Any Location or phone Nr?

call Amer Qasrawi 050 6176101 he is the owner..

[SSS]

jeep 4.0 I6L (2001) COMPLETE ENGINE:
http://ajman.dubizzle.com/classified/au ... -for-sale/

I think I told you about it once, no?

[Cybershot]

Thanks guys

Found One which supose to fit to my XJ hopefully



Looks like scrap .... ore am I wrong?

[heinz]

jeep 4.0 I6L (2001) COMPLETE ENGINE:
http://ajman.dubizzle.com/classified/au ... -for-sale/

I think I told you about it once, no?

Not all parts from the TJ engine will fit on the XJ. Here is a NAXJA thread on the exact subject:
http://www.naxja.org/forum/showthread.p ... ngine+swap

A complete engine swap will not work easily since the mounting brackets are different. Also the mounting points for accesories like alternator, water pump, etc. are different. Actually a complete TJ engine will not fit in the motor bay of the XJ.

Have a browse on http://www.naxja.org. It is a really good source on info on the XJ.

Not all Jeeps have the same 4.0L block:

The 1999–2001 Cherokee and 1999 Wrangler got a new block casting 53010449AA and guess what? The filter mounting face is now pointing downward again, just as it always did. Again, there are dowel pin holes in the deck and it uses a stud girdle. It is the first year of production of the new thrust plate design camshaft and associated machining of the block for the retaining bolts, which is what makes it unique.

The 1999-2004 model Grand Cherokee and 2000-2005 Wrangler have used what looks to be a clean sheet-design block. The front has a long ear on the lower left side that replaces a bolt-on mount. There are all kinds of different mounting bolt bosses on each side of the block, some metric, some not (see illustrations), and the filter mount is once again 90 degrees to the pan rail.

[Cybershot]

Thanks Heinz for your hint. I checked casting Nr and details about the different 4.0 l heads.

I will need some modification, but I am planing "something" which shall be worth the hassle